Super gutters

Super Gutters for Pool Cages and Screen Enclosures

A super gutter is a heavy-duty aluminum gutter used where a pool cage or screen enclosure meets the house. It drains a lot of water and also helps hold the enclosure frame. We install new and replacement super gutters across Central Florida.

Request a Free Estimate Call 407-879-5382

At a glance

Handles heavy rain
Supports the enclosure frame
Protects the fascia and roof edge
Protects the pool deck and yard

The basicsWhat are Super Gutters

On many Florida homes, the screen enclosure frame attaches along the roofline of the house. A super gutter runs along that line. Industry sources describe it as the main structural support for the enclosure: the frame bolts into the gutter, the gutter bolts into the fascia, and the fascia attaches to the roof.

It is not a typical K-style gutter. Super gutters are extruded aluminum with a rectangular profile and heavier walls than standard gutters. One Florida installer lists a wall thickness of about 0.040 to 0.050 inches against about 0.027 inches for a typical K-style gutter.

Common sizes are 5-inch and 7-inch. The 7-inch size is the modern standard and handles nearly double the water of the 5-inch. Larger sizes exist for big enclosures and commercial work. Seamless lengths can run long, and colors usually include white and bronze.

Super gutter along the roofline of a home with a screened pool enclosure

Why it mattersBenefits

Handles heavy rain

Wide troughs and large downspouts move a lot of water, which helps during Florida downpours.

Supports the enclosure frame

Because the frame attaches to it, a sound super gutter helps keep the structure stable.

Protects the fascia and roof edge

Leaks and overflow at this spot can rot fascia and rafters, so a working gutter protects them.

Protects the pool deck and yard

Controlled drainage keeps water off pavers and away from the foundation.

Built for Florida conditions

Heavy-gauge aluminum with stainless fasteners and UV-resistant sealant is chosen to stand up to sun, humidity and salt air.

Fewer seams

Long seamless runs mean fewer joints that could leak.

How it worksThe installation process

Assess the enclosure and roof edge

We check the gutter, the fascia behind it, and how the enclosure frame attaches.

Plan the work

Screen sections near the work may need to be detached, and the enclosure may be braced so it stays stable while the gutter is out.

Remove the old gutter

The existing gutter is taken off carefully to reveal the fascia.

Repair the fascia if needed

Damaged fascia is repaired or reinforced so the new gutter has solid wood to attach to.

Install the new super gutter

The new gutter is set with the correct slope toward the downspouts, fastened with corrosion-resistant hardware, and sealed.

Connect downspouts and reattach screens

Large downspouts are connected, and screen sections that were detached are put back.

Is it right for you?Is it right for your home?

Often a good fit when

Your pool cage or screen enclosure gutter leaks, sags or has rust staining.
Water spills over the side during storms.
There is a visible gap between the gutter and the house, or the spline is pulling loose.
You are replacing screens or repairing the enclosure and want the gutter checked.

Worth thinking about

A standard gutter is not a substitute for a super gutter on an enclosure, because it is not designed to carry structural load.
If the gutter has failed, the frame attachment may be affected. Sagging or, in severe cases, frame collapse is possible, so early attention is better.
Replacement can involve the fascia and the enclosure frame. Check with your local building department about permit requirements, since rules vary.
Rust-prone steel screws should not be reused. Stainless steel or similar corrosion-resistant fasteners are the better choice.

Pricing and upkeepCost and care

What affects the price

Linear feet of gutter
Size (5-inch or 7-inch)
Number of corners and downspouts
Fascia repair or reinforcement
Height of the roof edge and access
Whether the enclosure needs bracing or screen work

We give you a free written estimate after we see the home, so you know the number before any work starts.

Keeping it in shape

Look for rust stains or tiger striping, leaks at seams, water spilling over the side, a gap between the gutter and the house, or the spline pulling loose. Keep the trough clear of debris and schedule repairs early.

FAQsQuestions we hear

What is a super gutter?

It is a heavy-duty, structural aluminum gutter used where a screen enclosure or pool cage meets the house. It drains rain and helps support the enclosure frame.

How is a super gutter different from a regular gutter?

Super gutters are heavier and typically have a rectangular profile. They carry more water and also act as part of the enclosure structure. A regular gutter only handles water.

Should I choose 5-inch or 7-inch?

The 7-inch size is the modern standard and handles nearly double the water of the 5-inch. Larger enclosures, steeper roofs and heavy debris favor 7-inch. We recommend one at your estimate.

How do I know if my super gutter is failing?

Common signs are rust staining or tiger striping, leaks at seams, water spilling over during storms, a gap between the gutter and the house, and the spline pulling loose.

Do I need a permit?

It depends on your local rules and the scope of the work. Check with your city or county building department, and ask us at your estimate.